I purchased a
Splintered Light Miniature's Bat Swarm. A bat swarm comes in six basic pieces: the individual bats, a base, a rod to use as a pole, and three different sizes of bat mounting gadgets (for lack of a better term). I included a straight pin on the right as I will use them for mounting and to give a rough scale to the pieces. The set from Splintered Light is designed to make a swarm of bats, but I had different plans for these "creatures of the night".
 |
| (Click on the image for a larger version) |
I decided to base these bats individually so that I could use them as nuisance monsters with the rest of my 1/72 fantasy figures. I started by using # 10 washers and filling the empty spaces with pieces of plastic card. Except for the smaller size washer, it is the same procedure I always use when basing with washers.
 |
| (Click on the image for a larger version) |
The next step was to glue some cork to the washer with PVA/white glue. I allowed the glue to dry and then shape it into a piece of rock with an razor blade knife.
 |
| (Click on the image for a larger version) |
I then took the individual bat models and glued then to straight pins. On the underside of each figure was a spot modeled to allow it to be glued to the bat mounting gadgets. I used those places to super glue the bats to the straight pins. Luckily the heads of the straight pins were the same size as ends of the bat mounting gadgets so the models required no modification.
 |
| (Click on the image for a larger version) |
After the glue had dried and the bats were fixed on their new perches, I bent their wings into various poses so they would appear to be flapping instead of soaring on thermals like buzzards of the night.
 |
| (Click on the image for a larger version) |
Here is a view of the bats from above so you can see the posing from another angle.
 |
| (Click on the image for a larger version) |
I finished my models by dipping the straight pins in super glue and inserting it as deeply into the cork base as I thought looked good. I then added PVA/white glue to tops of the washers and dipped them into sand to make the rocks appear to be surrounded by gravel. Below you have a a view of the completed bats from the front.
 |
| Click on the image for a larger version) |
I have to take a small break and talk about the name of these models, the "Bat Swarm". I have to say that a group of bats is not called a swarm but a colony. Except these bats are no ordinary bats, these bats are evil man eating bats that swarm all over you. I think that in the case of fantasy bats, which exist only to swarm over adventurers and devour them, you would call them a swarm. Returning back to the models, I give you the last photo of the models - the reverse view.
 |
| Click on the image for a larger version) |
They are now ready to prime and paint. I will be showing pictures of the completed colony/swarm and individual bats in my next post. Questions and comments are always welcome. Thanks for reading...
 |
| Copyright © Ron Hamilton 2013, All Right Reserved. |
They look great. The basing idea is good.As always, the problem to have flying creatures flying without having a visible support. the person who invents something that cannot be seen will make a lot of money.
ReplyDeleteThey look good and nice to see you back posting.
ReplyDeleteI was thinking of doing something similar with this kit, so your post gives me a lot of good ideas.
ReplyDeleteGood to see you posting again! This blog has been an inspiration for my own 1/72 project.
Thanks guys, it is good to be back posting. I am working on posting at least 6 posts this year. If I get luck maybe I can do one a month. Wish me luck.
ReplyDeleteI should have pictures of the finished bats before March.
Check out Good Luck Minis. They are small (about 1 inch) soft plastic figures, mostly of animals. They are available at The Big Zoo, and I'm sure other places too. @ $.49 each they are very affordable. They include bats, ants, snakes, alligators, dinosaurs, and lots of other little crawlies that I find very useful with my 1:72 fantasy and SciFi figures.
ReplyDeleteI was wondering if the above might be spam, but I figured since I actually own some of these figures. I bought them to use with my fantasy figures, it is hard to argue with the logic one way or the other. They do have some promise. A simple wash made them look pretty sharp. I should base some and post some pictures. So many projects so little time.
ReplyDelete