Saturday, May 8, 2010

Filling the Gaps in 1/72d Fantasy Figures



Since lots of races are not manufactured as 1/72d figures, it is sometimes necessary to use figures from larger of smaller scales to have models to put on the table top. Since the figures in question are "fantastical creatures" or imaginary heights of said figures are purely a matter of taste. You simple need to look at any available figures and determine if a suitable proxy exist in another scale.



The first race I used from another scale with my 1/72 figures was Skinks manufactured by Games Workshop. These figures are intended to be used as small heroic 28mm Lizardmen. They measure 14mm from the sole of the foot to eye level. I thought they looked perfect when placed next to my other 1/72d figures.



(Click on the image for a larger version)


This figure was easy to get on the table top quickly and cheaply, I bought him pre-painted from the local hobby shop for a quarter. I rebased him on a quarter inch washer and he was ready to go. I later modified this figure by adding a spear made from tee push pin and a shield made from a texture upholstery tack.


(Click on the image for a larger version)


As usual, Friar Tuck (an Airfix Robin Hood set figure) and Conan (a Caesar Miniatures Adventures set figure) make their appearance for scale.


Thanks for reading...






Copyright © Ron Hamilton 2010

1/72 Ratmen (Skaven) Warband Completed



(Click on the image for a larger version)


Name:       Ratmen, Druids Children Rebels

Manufacturer:       Splinter Light Miniatures

Poses:       11 poses (more are available now, but at the time procured this was the entire line)

Figure material:       metal

Ability to Take Paint:





      excellent

Pose Quality:       lots of different armor and weapons reflect equipment Ratmen might carry as well as different roles from leader to conscript

Sculpting:       excellent, lots of sharp detal

Mould Lines:       little to none

Figures Released:       2008

I purchased these figures from Splintered Light Miniatures when I attended Historicon. These figures are well made, had almost no flash, lots of detail for a 15mm/18mm miniatures, and the service from David at Splintered Light is excellent. These figures were not manufactured as 1/72 but as 15mm/18mm figures. It would have been awesome if they were one or two millimeters taller, but they look good on the table top. Overall I am very happy with them.

TheRat Ogre shown will get his own article, but he is a 28mm Ratman figure from Rodrick Campbell. I knew he would make the perfect Rat Ogre for my 1/72d Ratmen and he did not disappoint.


(Click on the image for a larger version)



(Click on the image for a larger version)



(Click on the image for a larger version)



(Click on the image for a larger version)


As usual, Friar Tuck (an Airfix Robin Hood set figure) and Conan (a Caesar Miniatures Adventures set figure) make their appearance for scale.

Thanks for reading...



Copyright © Ron Hamilton 2010, All Right Reserved.












Tuesday, February 2, 2010

Why One72nd Fantasy?

I enjoy gaming with 1/72d scale figures. 1/72d figures cover most historic eras and periods. They work well in skirmish or massed battles. The figures are cheap, durable, and readily available. If all of your gaming happens in a shared scale then all of your terrain is interchangeable, in so much as possible, between periods. The only problem was they had very few fantasy figures until recently.

Dark Hold Miniatures started a new trend coming out with a small 1/72d fantasy figure line. Their orcs looked great and got me excited about 1/72d fantasy. Then the unexpected happened and the owner of Dark Hold passed away, and I thought 1/72d fantasy would go with him. It turns out that Dark Hold was the spark that ignited a blaze of new fantasy figures in this scale. Caesar, Dark Alliance (aka Red Box), and Minikinght released twelve sets between them. Dark Hold was purchased by Rebel Minis and that line is still available ass well.

If you add in all of the 1/72d game pieces and stuff from other scales that can be repurposed, you wind up with enough figures to have a pretty rich fantasy setting.  In this blog I will attempt document my growing collection and hopefully spark some interest in other so that the lines will keep growing,

Thanks for reading...





 
Copyright © Ron Hamilton 2010, All Right Reserved.